13mm Maple Veneer MDF Board 1220x2440mm

Features:

• The HPLT pressing procedure (High Pressure Low Temperature) used by Decospan guarantees the best quality for any type of panel.
• High-quality base boards that are made of wood fibres.
• Very fine structured wood is used as the raw material, producing a very uniform board that is extremely suitable for fine interior work.
• The veneer is presanded with grain 120.
• The thickness of the veneer is between 0.5 and 2 mm depending on the wood species used.
• Every tree is different so every veneer product has a unique appearance – This means that the colour and pattern can vary within the same wood species.
• Veneer is real wood and not an imitation like laminate or melamine.

Characteristics of commercial grade veneer:

• Small, centred knots.
• Less emphasis on structure.
• Larger and more prominent knots.
• Discoloration.
• Mineral streaks.
• More expression and more of the typical properties of the wood.
• A less regular structure with colour nuances, smaller series, and more knots.

Technical data:

• Grade – Commercial
• Density (EN 323) – 570-720kg/m³
• Flexural strength (EN 310) – 15-23N/mm²
• Surface tensile strength (EN 311) – 1.0N/mm²
• Modulus of elasticity (EN 310) – 1500-2400N/mm²
• Moisture content (EN 322) – 4-10%
• Formaldehyde emission (EN 120) – E1
• Thickness tolerance (EN 324-1) – ±0.2mm
• Size variability (EN 324) – ±5mm
• Thermal conductivity (EN 12524) – 0,15W/mK
• PCP content (EN 13986) – 5ppm
• Fire safety category (EN 13501) – D
• Perpendicular tensile strength (EN 319) – 0.45-0.70N/mm²
• Swelling after 24hr (18 mm) (EN 317) – 16%
• Finish – Veneer
• Colour – Maple
• Thickness – 13mm
• Brand – Decopanel